It took three coats of clearcoat to get the desired gloss that I wanted. After the first coat of clear, I wetsanded using the 1500 grit board. I waited two days for the clearcoat to cure, and then used a 2800 grit board with polishing compound to eliminate the orange peel.
I noticed that I was sanding down to the paint layer. That was a good sign to put on another layer of clear. I applied a nice wet layer of clearcoat and let the pieces dry for another few days. After the clear was fully cured, I was very satisfied with the results.
I may have been a bit obsessive with this project, but I wanted to apply some of the skills that I’ve learned during school. I used to make finished car clay models and prototypes. Most of my work nowadays is on the computer, or with pen and paper. It feels nice to work with your hands and transform raw materials into art.
